.
For the sake of letting you experience a remarkable achievement, I attach some pictures showing the small dingus "Super-ken 2000X" which was designed and built for giving a help to the youth of Kam Kong Memorial Church in their game plan in August. I was employed, as the Senior Executive Designer(高級執行設計師), to make this with an interim budget (around HK$1,500) and to complete this within 3 calender days.
.
The working principle of this dingus that is quite simple and based on the game law of "First-Push-First-Talk". It is a tool to help discerning the applicant who is the first one to push the button during the answer game. Super-Ken 2000X is a series of Super-Ken 2000 made and designed by Mr. Ken Ngan (say undersigned). This dingus is a reliable and durable individual.
.
Materials for Super-Ken 2000X are outlined below, they are these:
one (1 master panel) High Grade Anti-Flaming Plastic Cabinet;
Six (6 slave panels) High Grade Anti-Flaming Plastic Panels;
Signal Lamps (6, -2 red, 1 blue, 1 yellow, 1 green & 1 white) and push buttons (6);
Relays (12), Sockets (12) and Twist-Paired Cables (approx 20m);
Drilling Machine and Metal Drills and Hole saws (Dia 22mm, 28mm).
.
(Signal lamps, twist-paired cables and alumin guide bars for relay brackets)
(6 nos of Anti-flamming cases and relays....)
.
Materials for Super-Ken 2000X are outlined below, they are these:
one (1 master panel) High Grade Anti-Flaming Plastic Cabinet;
Six (6 slave panels) High Grade Anti-Flaming Plastic Panels;
Signal Lamps (6, -2 red, 1 blue, 1 yellow, 1 green & 1 white) and push buttons (6);
Relays (12), Sockets (12) and Twist-Paired Cables (approx 20m);
Drilling Machine and Metal Drills and Hole saws (Dia 22mm, 28mm).
.
(Signal lamps, twist-paired cables and alumin guide bars for relay brackets)
(6 nos of Anti-flamming cases and relays....)
.
The drilling was done in two steps. First, drilling a locator hole on the top of the case. This hole should be just slightly smaller than the size of the pilot bit of the hole saw. Using the drilled locator hole as guides, using a sharp hole saw (dia 28mm) to enlarge the hole to 28mm....the standard size. Same steps for another 5. One push button and one signal lamp were flash mounted on the top and side of each case.
Signal Lamp was flash-mounted at the top, and push button at one side of each slave panel.The drilling was done in two steps. First, drilling a locator hole on the top of the case. This hole should be just slightly smaller than the size of the pilot bit of the hole saw. Using the drilled locator hole as guides, using a sharp hole saw (dia 28mm) to enlarge the hole to 28mm....the standard size. Same steps for another 5. One push button and one signal lamp were flash mounted on the top and side of each case.
There are six slave panels ready for teams, each team can be classified by its colored lamp, e.g.: Yellow (team 1), Green (team 2), Red (team 3), White (team 4), Blue (team 5)..and also red (team 6).
Control Circuit of Super-Ken 2000X
I printed some labels as a token of Super-Ken 2000X and adhibited on the master panel.
.
Control Circuit of Super-Ken 2000X
I printed some labels as a token of Super-Ken 2000X and adhibited on the master panel.
.
(This dingus can serve for 6 teams in the mean)
.
.
As a Senior Executive Designer, I hope my effort can be making a great difference to the youth living with Jesus in the Kam Kong Memorial Church.
.
Best Regards,
Ken Ngan
No comments:
Post a Comment